電容儲能點焊機技術參數
電容儲能點焊機應用范圍
普通低碳鋼板、不銹鋼板、鍍鋅板、鋁板點焊、多點凸焊；
Spot welding and multi-point projection welding for ordinary low-carbon steel plate, stainiess steel plate, galvanized plate and aluminum plate;
銅線和銅板的點焊連接、銀點和銅片的凸焊、精細電子零件的焊接；
Sport welding for copper wire and cooper plate, projection welding for silver contact and cooper sheet,welding for precision electronic parts;
線材的多點凸焊；
Multi-point and projection welding for wire rod;
汽車行業熱成型鋼、高強度鋼與螺母、螺栓的凸焊；
Projection welding for hot-formed steel and high-strength steel, nuts and bolts in automobile industry;
需要密封效果的環凸焊接工藝；
Circumferential projection welding process requiring sealing effect;
對焊接外觀要求高的場合等。
Applications with higher requirements on appearance, etc.
電容儲能點焊機產品特點
1.電網容量需求低，對電網沖擊小/Low demand and less impact on power gride
同樣的焊接能力下，儲能點焊機只需要交流點焊機的1/5以下的容量，中頻焊機1/3左右的容量。
Under the same welding capacity.the stored-energy spot welder only needs less than 1/5 capacty as that ot an AC spot welder and about 1/3 capacity as that of a medium-freguency welder.
2.硬規范焊接特性/Good welding characteristics for thin slabs
大電流、短時間、大壓力，尤其適合凸焊工藝:多點凸焊、螺母凸焊、環凸焊等，滿足熱成型鋼的點焊、凸焊工藝質量要求。
High current. short time and high pressure. especially suitable for projection welding process: muiti-pont proecon Nelding. nut prolecton welding.
and circumterential projection welding. etc., all of which meet the quality requirements of spot welding and projecton weldina Drocess of hot-formed
steel
3 .能量波動極小，焊接質量穩定/Small energy fluctuation and stable welding quality
焊接熱量波動在1%內，焊接品質穩定可靠。
The weiding heat fluctuates within 1%, and the welding quality is stable and reliable.
4.放電時間極短，熱影響小，焊點美觀/Very short discharging, small heat effect and good appearance of solder point
焊接放電時間在10ms左右，工件表面不變色，熔核區域外變形小。
The discharging time is about 10ms, the workpiece surface does not change color,and the deformation outside the nugget area is small.
5.冷卻要求低，節能/Low cooling requirement and energy saving
主變壓器不需要通水冷卻，不會因為連續長時間焊接而過熱，可以節省大量的冷卻水資源。
The main transformer does not need water cooling and will not overheat due to continuous welding for a long time, which can save a lot of cooling
water resources.
6不受電網波動影響，保證輸出電流穩定/No effect owing to power grid fluctuation for stable output current
控制邏輯保證電容只有在充電到設定值后才允許放電，從而保證了焊接電流的恒定。
The control ogic ensures that the capacitor is allowed to discharge only after charging to the set value for constant welding current.
7.超大焊接電流、超強焊接能力/Super-high welding current and powerful welding ability
可至200KJ儲能量，可滿足超大焊接尺寸零件的焊接。
It can store energy up to 200KJ,which can meet the welding of parts of very large sizes.
8.豐富的擴展功能/Abundant extended functions
可編程輸出，更好地與PLC、機器人等適配。
Programmable output for better adaption to PLC, robot, etc.
